Keeping a good roof over your head is very important for the protection of your home Mr.Roof.Inc is a locally owned and operated roofing company based in Attleboro MA.



A new custom siding job is not only one of the best ways to improve the appearance of your home, but it also delivers appeal, longevity and energy efficiency while reducing maintenance costs.



New windows can enhance the look of your home and make it quieter and less drafty, and new windows are easier to clean and maintain than old ones with combination screens and storm windows.



A skylight can provide your home with daylighting and ventilation. When properly selected and installed, an energy-efficient skylight can help minimize your heating, cooling, and lighting costs.

Southern Massachusetts and Rhode Island, A+ rated – Home Improvement Contractor.


Founded by Eugene & Vladimir back in 2007, Mr.Roof.Inc has established itself as one of the greatest providers of remodeling services.

  • Quality Workmanship and Knowledge
  • A Job is Done on Time and on Budget
  • Best warranties in the idustryl
  • Fully Licensed , bonded & Insured
  • Competiteve pricing
  • Owner’s Operated
  • 100% Financing available
  • Credit cards accepted

We provide you the finest quality care with personal attention. We believe in prompt service from start to finish. We want to be your one and only destination for all your needs. We never ask you for  any  money up front until project is done. Our company don’t use salesmen’s that’s mean you always dealing with Eugene or Vlad the company owners.

Short Facts


Our company is licensed and insured, and we give affordable solutions to your roof’s need by our trained staff. When it comes to the quality of the roofing installation you can be assure that we follow all the manufacture requirements and industry standards. Most of the jobs gets done in 1 or 2 days and our reviews speaks for themselves how good we are at our trade.


We are Certified Installers from “GAF” & Certainteed and Every our installation come with “Premium” manufacture coverage which is 50 year Non-Prorated, and warranty certificate comes to you mail within 30 days of completion. So during the warranty registration with the manufacturer  we pinpoint what we had to do about attic ventilation and what materials and accessories were used during the install, this will give you additional layer protection against poor or inadequate installation.  Read more about different overages available.


Sometimes thinks  happen in  the life that can take affect on finances available  to do roof replacement , but roof over your head can wait until things get better. So we have few different financing available. Traditioal one that can go up to 40 000$ and could be as low as 71.70 or the one we call ” Same-As-Cash” one, where we do the job and you don’t have to pay a penny for 12 month. It might give you sometime until things get better.


Siding installation is not same simple as it may seams for the first time. I’m not only mean that it requires best workmanship and installation it also require to determine what siding color to choice , sometimes its good idea to do the mix of colors or even types of siding.Fast and effective installation. We will install your siding in no time at all. Once we strip down your home of it’s existing siding, new siding installation begins right away and is finished before you know it.


We stay 5 years behind our installation, also we backing up with limited Lifetime manufacture warranty, we working with two America largest siding manufacturers MASTIC & CERTAINTEED for vinyl siding  . Follow the link to read more about specific warranty details.


Upgrading or replacing your exterior siding can be a daunting decision. Mainly because of the all the choices you have to make on the different types of siding for homes. Insulated vinyl, fiber cement, or wooden shakes are just a few of the siding options and materials you have as a homeowner. The good thing about all these types of siding is that for every style of house and budget there is a suitable siding option waiting for you!


We promise the highest quality product, professionally installed at a fair price, along with service after the sale.Our willingness to be selective about the jobs we accept, means our customers receive quality service and quality products every time. We’re proud of our work, so you can be proud of your home.


Mr,Roof .Inc partners provide products manufactured by the finest window & door companies in America. These companies supply the product warranty that is the foundation of our Product Warranties. Under this protection, the vinyl components of the window will not blister, peel, rot, or corrode. Additionally, mechanical/working parts are warranted to be free from manufactured defects in material and workmanship. Length of warranty coverage, along with other terms & conditions are defined by the original manufacturer warranty document.


There are many different types of windows that make up the construction of your house. Windows allow natural light to flood your rooms during the day and let in air to keep it fresh and dry. Your windows also help define the style of your house whether it is traditional or modern. You can customize nearly any window to suit your changing tastes and needs. Follow the link to see what type of window is suitable most at your home.


Skylights are a good investment, if your desire is to enhance the aesthetics of your home. They will provide an impressive amount of natural light while giving you a snapshot of the night sky. And like many other architectural enhancements, skylights can add to the resale value of your home.Skylights can also provide natural ventilation, providing you have the hinged-style so that you can open the window up to let air in. You can even get skylights that have rain sensors and automatically close in case of a storm.


Mr.Roof.Inc  is authorized 3-star local Velux certified  Installer so our workmanship backs up by Velux , industry first 10-year “No Leak” installation warranty that covers correct skylight and appropriate flashing installations (product and labor) against leaks, no matter who installs the skylight. For important details about this outstanding warranty, please see our warranty brochure.


Skylights may be plastic or glass, fixed or operable, and made in any number of sizes and styles. They can have insulated glazing, UV-blocking capabilities, louvers, shades, and more. Follow the link to see more details about every style.


The purpose of a flat roof or any roof for that matter is to keep your home or building safe and dry. The roof MUST protect your investment from the elements such as rain, snow, and even the sun’s heat.


Manufacture warranties provide industry-leading protection, covering the repair of leaks from a variety of causes – including accidental membrane punctures, hail up to three inches in diameter, and winds of up to 120 mph – and offer terms of up to 40 years. With a Manufacture warranty, you can feel confident that your building has long-term protection against an unlikely failure. Mr.Roof.Inc workmanship warranty for commercial applications is 10 years.


We receive a lot of requests for single-ply roofing membranes that can both stand up to the elements and provide years of reliable protection. Here are some of the very basic facts about three flat roofing types and how they measure up to each other.


Whether you are installing new gutters onto your home or replacing old ones, there are a variety of reasons to protect your home with a seamless gutter system. Mr.RooF.Inc. specializes in home improvement solutions that make your life easier and increase the value of your home. Here are just a few benefits that you’ll gain from seamless gutter installation from Mr.Roof.Inc, please follow the link.


When gutters become clogged by leaves, pine needles and debris, your gutter will overflow causing damage to your landscaping, basement or foundation.Shur Flo offers you the perfect solution to prevent leaves and debris from clogging your gutter.


We stay behind our installation for as long as 2 years. Every our gutter installation or replacement comes with “Fascia Apron” aluminum extension piece that covers the gap between drip edge and the gutter, so after our install you will never see any ice or water coming out from behind the gutter.



WHY Mr.Roof.Inc

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.


Mr.Roof.Inc is a family owned business that has been proudly serving the Southern Massachusetts and Rhode Island area  since 2000 th, being fully licensed and insured in Massachusetts and Rhode Island .


Mr.Roof.Inc is located right down the road 1 in Attleboro MA. We focus all of our efforts on serving our surrounding area so you can rest assured there is nobody on our list more important than you.


A range of financing options are available such as 0% interest plans, no initial payment plans and traditional financing can be as long as 12 years and payments as low as 71$ . We also accept MasterCard and Visa credit cards.


We are Fully insured with 2 000 000$ Liability insurance and All out stuff covered with working compensation insurance.  We properly Insured, Licensed and registered in both MA & RI states.


Click here to estimate your project cost.

Roof Replacement Providence

Roofing ProvidenceRoofing services in Providence. When it’s time to think of the professional help? What should be the house? First of all, it must be dry and warm. The one “boss” who is responsible for these two important criteria is the roof. If the roof is in a quite bad condition, then the problems will not keep you waiting. Leaks, dampness, large bills for heating, violation of the general appearance of the house – these are only some examples from the endless list of possible problems.

But how to understand that it’s time to replace the roof and it can’t wait anymore? For this, a qualitative inspection of the roof and rafter system is required. And for this, you will need a help of the qualified roof companies in Providence. Specialists recommend to do it every year, even for the owners of new roofs. As a result of the inspection, there may be problems that will indicate the scale of the necessary repairs.

Let’s consider the main “bells” that warn you to think about the roof restoration in Providence until it’s not too late.

  1. You have found small cracks roofing and noted that it lost its aesthetic appearance. At the same time, the rafter system is in a good condition- any rot, cracks or fungus is not seen on the material. This case is the easiest. To fix the problem in time, it is enough to buy a new roofing material for the roof and replace the old one with it. However, if you don’t have the time or simply don’t want to do this by yourself, just use the help of companies which are specialized in roofing and construction in Providence.
  2. You have found traces of moisture on the walls of the attic. In addition to this, you have noticed that the house became very humid. All this indicates that the roof leaks or excessively accumulates moisture and you need the help of the roof gutter company in Providence. When removing the roofing, most likely you will see the traces of rot or even fungus on the crate. This problem isn’t so simple as the previous one and requires more time and efforts to fix it. As a consequence, not only the replacement of the coating but also the carcass will be required. Roof drain in Providence is a common problem so specialists will easily cope with this task in the comparably short time period.
  3. You have found the serious destruction of the roofing system, thermal insulation layer, and hole in the roofing. This case is the most difficult. It will require a complete reconstruction of the entire roof. You should be ready that the cost of such roof replacement in Providence will be significant. If money spending is inevitable, it is worth considering whether it makes sense to increase the area of the house by constructing an attic.

Roofing Providence

Roofing ProvidenceThe dismantling of the old roof. The decision on a partial or complete replacing roof in Providence is made. The next stage of this process if you want to perform it by yourself, is the dismantling of the old roof covering. If for the flooring you used slate, then you need a crowbar and a hammer to remove it. If in the future the owner of the house does not plan to use the sheets, then it is possible to break holes in the slate in the places where it is attached to the crate and throw the sheets to the ground. If you are going to re-use it, then work on removing the old slate on a roof in Providence should be done more accurately and necessarily with an assistant. To avoid possible problems, spoilage of the material, and just to simplify your work, you can use the service of such well-known professionals as Handyman roofing in Providence or Mueller roofing in Providence as well as ask for help in young but rapidly developing companies.

The dismantling of the crate and the whole rafter system is done using a crowbar or saw. If the roof was covered with more modern materials, such as profiled sheeting, metal tile or ceramic tiles, then the roof dismantling should be done as accurately as possible. This coating can always be reused for roofs of small areas such as a garage or cottage.

On what cover is it better to replace the old roof? After the dismantling, you need to make a roof replacement in Providence with the new cover. And at this stage, the most common question is “what cover to choose better?” According to the roofing consultants in Providence, if the roof needs a major overhaul or a complete replacement of the structure, there are no restrictions on the choice of the coating material. But if you are going to make the replacement of the roof on the old rafter system, the experts recommend using metal or profiled sheeting. Both these materials will cover the shortcomings of the old design.

How to replace slate with metal without consequences? Any work with your house, especially with it roof, may result in serious negative consequences if you did something wrong. In order not to worsen the current situation but make it better, it is recommended either refer to the roofing repair companies in Providence or at least ask professionals for advice if you are going to repair it by yourself. Replacing the roof of slate on a new material begins with the dismantling and inspection of the rafter system. If traces of rot or damage from insects are found, the destroyed parts of rafters should be eliminated and replaced with the new ones. After that, the layer of hydro-barrier is spread out which should be attached to the entire area of the rafters with the help of a construction stapler. Then, the installation of the crate begins – the bar is mounted perpendicular to the roof ridge and the final layer of the hydro-barrier layer is fixed. After that, you should fasten bars of the same section over the beams. It is necessary to start installing the bars from the edge, Also, during your work, it is very important to check the level accuracy with the help of a cord that should be diagonally installed.

When installing the roof in Providence, the laying of metal tile sheets should start from right to left. This is important since the sheets have their own fixing system and if they are stacked in the right direction, then all work will pass quickly and smoothly. If the protruding places are found, then they must be cut off by the circular saw. The bottom of each sheet should be necessarily mounted 8 cm below the rafters.

Quality Roofing Providence

Specific features of replacing slate on profiled sheeting. In this case, a roofing work in Providence begins in a similar way as for metal roofing – from the dismantling of slate and careful inspection of rafters.

The profiled sheet is produced in different sizes so for each roof builder in Providence it’s extremely important to choose its size according to the necessary dimensions. Next, directly on the old rafters, the waterproofing coating is laid. The joints of the film must be qualitatively glued with a self-adhesive tape. Then the layer of thermal insulation (as a rule it is a stone wool) should be laid.

Mounting the sheets of profiled sheeting starts from the front side of the roof in one or two waves (depending on the roof type). In the places where the sheets overlap, they must be bonded tightly.

If the roof has a small slope, it is recommended to seal it. The fastening of the material to the crate should be carried out exclusively by screws with rubber gaskets.

Quality roofing works in Providence, whether partial or complete, requires large material and labor costs. Today you can find different prices for such work. The main thing to remember is that the roof is not the place of unreasonable saving. However, you shouldn’t think that the higher is the cost of the roofing in Providence, the better result you will get. Choose the experienced companies such as Barker roofing in Providence or young companies offering commercial roofs services in Providence with good reviews.

© 2021 Mr.Roof.Inc 829 Newport ave. Attleboro MA 02703